Share
Share with:
Ethos 256NIY075P01 Medium Duty 250 Series Nylon Wheel with Brake Swivel Shaft
| 1-29 Cái | 230.000 ₫/ Cái | |
| 30+ Cái | -5% | 218.500 ₫/ Cái |
Shipping information
Products information
- Nhựa PA chống va đập cực tốt và có độ bền hóa học cao.
- Chịu được nhiệt độ thấp và cách điện tốt
- Nhiệt độ nóng chảy cao, chịu nhiệt tốt và có tính tự bôi trơn
- Tuổi thọ cao, sử dụng bền bỉ
The Ethos 256NIY075P01 medium-duty 250 series nylon wheel with brake is widely used in workshops and factories to transport goods and materials. The trolley wheel plays a very important role, helping to reduce manual activities, reduce human effort and save time and costs in production. Ethos 256NIY075P01 is made from nylon plastic, providing the ability to operate in many different environments such as water, gasoline, and mild chemical environments...
1. Features of Ethos 256NIY075P01 Nylon Wheels
Nylon cart wheels are resistant to water, gasoline, grease and some other chemicals... withstand medium loads, are waterproof, have a low coefficient of friction, will wear out slowly and move lightly. If the same diameter, Nylon plastic wheels can withstand 3 times more load than rubber wheels.
Ethos 252NIY125P01 is commonly used in industry because of its easy rolling and resistance to abrasion. However, due to the hard material, this type of wheel will cause quite a lot of noise when running. Therefore, it is not suitable for environments that require quietness. You should use this wheel in industrial areas with smooth surfaces or for carts that often have to carry heavy loads. The product does not leave marks on the floor, commonly used in processing factories, seafood production, food, pharmaceuticals, cold storage, freezers, laboratories, with high requirements on food hygiene and safety.
Ethos 256NIY075P01 Nylon Wheel
2. Advantages of Ethos 256NIY075P01 Nylon Wheels
- Ethos nylon wheels are made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, cold storage.
- Often used for low-lift hand trucks, high-lift hand trucks, semi-automatic electric forklifts and other industrial equipment.
- Nylon material is widely used in industry due to its easy rolling, high load-bearing, high impact resistance and almost no aging
- The life of Nylon can be up to several decades, the working temperature range is up to + 80 degrees C.
3. Notes when using Ethos 256NIY075P01 Nylon Wheels
Should use banh xe trolley with the correct load, limit leaving the cart outdoors in the sun and rain to reduce the life of the wheel. Depending on the environment, use the wheel properly, such as not using the wheel at too high a temperature, or on rough or smooth floors... Do not push the cart too fast because it can easily cause it to fall, so maintain a speed of no more than 4-5 km/h.
