Share
Share with:
Ethos 256NIY075T10/T06 Medium Duty 250 Series Nylon Swivel Caster with Brake
230.000 ₫/ Cái
| 1-29 Cái | 230.000 ₫/ Cái | |
| 30+ Cái | -5% | 218.500 ₫/ Cái |
1
Shipping information
Shipping address:
Q. 1, Hồ Chí Minh
Shipping cost:
0 ₫
Đổi trả & bảo hành:
7 ngày miễn phí trả hàng | 100% hàng chính hãng
Products information
- Nhựa PA chống va đập cực tốt và có độ bền hóa học cao.
- Chịu được nhiệt độ thấp và cách điện tốt
- Nhiệt độ nóng chảy cao, chịu nhiệt tốt và có tính tự bôi trơn
- Tuổi thọ cao, sử dụng bền bỉ
The 250 series Nylon wheel with medium load and Ethos 256NIY075T10/T06 spindle is widely used in workshops and factories to transport goods and materials. The trolley wheel plays a very important role, helping to reduce manual activities, reduce human effort and save time and costs in production. Because it is made of Nylon plastic, the wheel can operate in many different environments such as water, gasoline, and mild chemical environments...
1. Features of Ethos 256NIY075T10/T06 Nylon Wheels
Nylon cart wheels are resistant to water, gasoline, grease and some other chemicals... withstand medium loads, are waterproof, have a low coefficient of friction, will wear out slowly and move lightly. If the same diameter, Nylon plastic wheels can withstand 3 times more load than rubber wheels.
Ethos 256NIY075T10/T06 is commonly used in industry because of its easy rolling and resistance to abrasion. However, due to the hard material, this type of wheel will cause quite a lot of noise when running. Therefore, it is not suitable for environments that require quietness. You should use this wheel in industrial areas with smooth floors or for carts that often have to carry heavy loads. The product does not leave marks on the floor, commonly used in processing factories, seafood production, food, pharmaceuticals, cold storage, freezers, laboratories, with high requirements on food hygiene and safety.
Detailed structure and outstanding features of Ethos 256NIY075T10/T06 Nylon Wheel
2. Advantages of Ethos Nylon Wheels 256NIY075T10/T06
- Ethos nylon wheels are made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, cold storage.
- Often used for low-lift hand trucks, high-lift hand trucks, semi-automatic electric forklifts and other industrial equipment.
- Nylon material is widely used in industry due to its easy rolling, high load-bearing, high impact resistance and almost no aging
- Nylon is lifespan can be up to several decades, the working temperature range is up to + 80 degrees Celsius.
3. Notes when using Ethos 256NIY075T10/T06 Nylon Wheels
- Should use banh xe trolley with the correct load.
- Limit leaving the cart outdoors in the sun and rain to reduce the life of the wheel.
- Use the wheel properly based on the environment, such as not using the wheel at too high a temperature, or on rough or smooth floors....
- Do not push the cart too fast because it can easily cause it to fall, the speed should not exceed 4-5 km/h.
View more
