Ethos 251NIY075H10 Spindle Medium Duty 250 Series Nylon Wheel

• Nhựa PA chống va đập cực tốt và có độ bền hóa học cao.
• Chịu được nhiệt độ thấp và cách điện tốt
• Nhiệt độ nóng chảy cao, chịu nhiệt tốt và có tính tự bôi trơn
• Tuổi thọ cao, sử dụng bền bỉ

Ethos 251NIY075H10 Medium Load Nylon Wheel Series 250 is widely used in workshops and factories to transport goods and raw materials, helping to minimize manual activities, reduce human effort and save time and costs in production. Ethos 251NIY075H10 is made of Nylon plastic so it can operate in many different environments such as water, gasoline, light chemical environments...

1. Features of Ethos 251NIY075H10 Nylon Wheels

Ethos swivel casters are a medium-duty caster, made from Nylon material that provides resistance to water, gasoline, grease and some other chemicals... Low coefficient of friction, long-lasting wear and light movement, no marks on the floor,

Nylon casters are commonly used in factories processing, producing seafood, food, pharmaceuticals, cold storage, laboratories,... Places with high requirements for food hygiene and safety. However, due to the hard material, this type of wheel will cause quite a lot of noise when running, so this wheel should be used in places with smooth floor surfaces or for carts that often carry heavy loads.

If the diameter is the same, Nylon plastic wheels can withstand 3 times more load than rubber wheels. The product is commonly used in industry because of its easy rolling and resistance to abrasion.

Ethos Nylon Wheel 251NIY075H10

2. Advantages of Ethos Nylon Wheels 251NIY075H10

• Nylon wheels are used for low-lift hand trucks, high-lift hand trucks, semi-automatic electric forklifts and other industrial equipment.
• The life of the wheel can be up to several decades.
• Nylon material is widely used in industry due to its easy rolling, high load-bearing, high impact resistance and almost no aging.
• Working temperature range up to + 80 degrees C.

3. Notes when using Ethos 251NIY075H10 Nylon Wheels

• Should use banh xe trolley with the correct load.
• Limit leaving the cart outdoors in the sun and rain to reduce the life of the wheel.
• Use the wheel properly based on the environment, such as not using the wheel at too high a temperature, or on rough or smooth floors....
• Do not push the cart too fast because it can easily cause it to fall, the speed should not exceed 4-5 km/h.