Ethos 292NMH100P45 Medium Duty 290 Series Nylon Caster Fixed Axle

• Chất liệu Nylon chống va đập cực tốt và có độ bền hóa học cao.
• Chịu được nhiệt độ thấp và cách điện tốt
• Nhiệt độ nóng chảy cao, chịu nhiệt tốt và có tính tự bôi trơn
• Tuổi thọ cao, sử dụng bền bỉ

Ethos 292NMH100P45 medium load Nylon wheel series 290 is widely used in workshops and factories to transport goods and raw materials, playing a quite important role, helping to minimize manual activities, reduce human effort and save time and costs in production.

1. Features of Ethos 292NMH100P45 Nylon Wheels

Ethos 292NMH100P45 is made of Nylon plastic, it can operate in many different environments such as: Water environment, gasoline environment, light chemical environment... can withstand medium load, waterproof, low coefficient of friction will wear out slowly and move lightly, not aging

If the same diameter, Nylon plastic wheels can withstand 3 times more load than rubber wheels. Nylon wheels are commonly used in industry because of their easy rolling and resistance to abrasion. However, due to the hard material, this type of wheel will cause quite a lot of noise when running. Therefore, it is not suitable for environments that require quietness. You should use this wheel in industrial areas with smooth floors or for carts that often have to carry heavy loads.

Nylon wheels do not leave marks on the floor, and are commonly used in factories that process and produce seafood, food, pharmaceuticals, cold storage, freezers, laboratories, with high requirements for food hygiene and safety.

Ethos 292NMH100P45

2. Advantages of Ethos Nylon Wheels 292NMH100P45

Ethos nylon wheels are made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, and cold storage.

Because it is not compressed, when lifting and pulling goods, the vehicle moves very smoothly. Nylon wheels are used for low-lift hand trucks, high-lift hand trucks, semi-automatic electric forklifts and other industrial equipment.

The life of Nylon can be up to several decades.

Nylon is widely used in industry due to its easy rolling, high load-bearing, high impact resistance and almost no aging.

Working temperature range up to + 80 degrees C.

3. Notes when using Nylon Wheel 292NMH100P45

Should use banh xe trolley with the correct load.

Limit leaving the cart outdoors in the sun and rain to reduce the life of the wheel.

Use the wheel properly based on the environment, such as not using the wheel at too high a temperature, or on rough or smooth floors....

Do not push the cart too fast because it can easily cause it to fall. Speed do not exceed 4-5 km/h.