Ethos 172 NOA 050 P42 Series 170 Light Duty Nylon Caster Fixed Axle

• Chất liệu Nylon chống va đập cực tốt và có độ bền hóa học cao.
• Chịu được nhiệt độ thấp và cách điện tốt
• Nhiệt độ nóng chảy cao, chịu nhiệt tốt và có tính tự bôi trơn
• Tuổi thọ cao, sử dụng bền bỉ

Light-duty Nylon wheel series 170 fixed axle Ethos 172 NOA 050 P42 is designed to be fixed and quite sturdy. The wheel is widely used in workshops and factories to transport goods and materials. The trolley wheel plays a quite important role, helping to minimize manual activities, reduce human effort and save time and costs in production. Ethos 172 NOA 050 P42 is made of Nylon plastic. It can operate in many different environments such as: Water environment, gasoline environment, environment with light chemicals...

1. Features of Ethos 172 NOA 050 P42 series 170 fixed axle light duty Nylon wheels

Ethos 172 NOA 050 P42 series 170 fixed axle light duty Nylon wheelsare resistant to water, gasoline, grease and some other chemicals..

Nylon wheels can withstand heavy loads, are waterproof, have a low coefficient of friction, will wear out slowly, move smoothly, and will not age

If the diameter is the same, Nylon plastic wheels Ethos can withstand loads 3 times higher than rubber wheels.

Nylon Ethos wheels are commonly used in industry because they are easy to roll and difficult to wear. However, due to the hard material, this type of wheel will cause quite a lot of noise when running. Therefore, it is not suitable for environments that require quietness. You should use this wheel in industrial areas with smooth floors or for carts that often have to carry heavy loads.

Nylon wheels do not leave marks on the floor, are commonly used in processing plants, seafood production, food, pharmaceuticals, cold storage, freezers, laboratories, with high requirements for food hygiene and safety.

Detailed structure of Ethos 172 NOA 050 P42 Fixed-shaft Nylon Wheel

2. Advantages of Ethos 172 NOA 050 P42 series 170 fixed axle light duty Nylon wheels have many outstanding advantages such as:

• Ethos nylon wheels are made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, and cold storage.
• Because it is not compressed, when lifting and pulling goods, the vehicle moves very smoothly. Nylon wheels are used for low-lift hand trucks, high-lift hand trucks, semi-automatic electric forklifts and other industrial equipment.
• The lifespan of Nylon can be up to several decades.
• Nylon is widely used in industry due to its ease of rolling, high load capacity, high impact resistance and almost no aging.
• Working temperature range up to + 80 degrees Celsius.

Notes when using Nylon wheels

• Should use the right load capacity wheel.
• Limit leaving the vehicle outdoors in the sun and rain to reduce the life of the wheel.
• Use the wheel based on the environment properly such as not using the wheel at too high a temperature, or on rough or smooth floors....
• Do not push the cart too fast because it can easily cause it to fall. Speed do not exceed 4-5 km/h.

Currently on the market there are many types of nylon cart wheels, however the product BLight-duty Nylon wheel series 170 fixed axle Ethos 172 NOA 050 P42 is favored and trusted by many customers. If you want to own this product, please contact us immediately.